Product Description
Diamond segment saw blade welding brazing machine for stone Mining cutting
Features
1.Fast heating speed: the fastest heating speed is less than 1 second (the speed can be adjusted and controlled).
2.Wide heating: can heat a variety of metal workpieces (the detachable heating induction coil can be replaced according to the shape of the workpiece).
3.Easy to install: connect the power supply, induction coil and water inlet and outlet pipes to use; small size and light weight.
4.Easy to operate: you can learn it in a few minutes.
5.Quick start: heating can be started as soon as water and electricity are supplied.
6.Less power consumption: It saves about 70% of power than old-fashioned tube high-frequency equipment. The smaller the workpiece, the less power it consumes.
7.Good effect: heating is very uniform (the density of the induction coil can be adjusted to ensure that all parts of the workpiece are temperature required by each), the temperature rises quickly, there is less oxide layer, and there is no waste after annealing.
8.Full protection: equipped with alarm indications such as overvoltage, overcurrent, overheating, water shortage, etc., and automatic control and protection.
9.Temperature controllable: Control the temperature of the workpiece heating by setting the heating time, so that the heating temperature can be controlled to a technical point.
10.Full load design: 100% full load design, sustainable for 24 hours of uninterrupted work.
11.Small size and light weight: only about tens of kilograms, small footprint, saving factory space for operations,
Good environment, environmentally friendly, energy-saving, safe, no noise, exhaust gas and dust discharge.
12.Eliminate high voltage: eliminating the need for a step-up transformer that generates nearly 10,000 volts of high voltage, which is very safe.
| DIAMOND CUTTER WELD SOLDER G70A |
| Maximum input current |
70A |
power |
15kw |
| Input voltage |
Single phase 220V 50-60HZ |
Load duration |
100% |
| Input voltage range |
180V-245V |
Cooling water pressure Water pressure |
≥0.2MPa |
| Output oscillation frequency |
30-100KHZ |
Cooling water flow |
rate:2-5L/min |
| Volume(CM) |
W20×H35×L46 |
Weight |
25KG |
| GP-70A |
Heating current |
200-800A(200-2000A) |
|
| heating time |
0.1-9.9seconds(can be customized1-99 s) |
74454554
Company Profile
){kind=link}
){kind=link}